Monday, August 24, 2009

Unlock Innomedia MTA6328-2re

  1. Disconnect WAN ( no internet).
  2. Connect computer to the gizmo via LAN port
  3. Open the browser and type the following address http://192.168.251.1/
  4. Enter user id=user, pass=welcome
  5. Cut and paste the following link and press enter to restore factory default http://192.168.251.1/restore2.ssi
  6. Power cycle the gizmo and login to admin link with factory default password. http://192.168.251.1/Voice_adminPage.htm
  7. id=admin, pass=slapshot (for V3.0.77, V3.0.75)
  8. Disable Provisioning, Menu--IP Network ---Provisioning Setting
  9. Change username and password.
Posted by at
Labels: ,

3 comments:

  1. chandanaJuly 31, 2018 at 6:41 AM

    WHAT IS LOGIN USER NAME AND PASSWORD

    ReplyDelete
  2. AnuragFebruary 11, 2019 at 4:04 AM

    Does somebody have the 3.0.75 version of the sunrocket software? Or some way to install the Sunrocket or unlocked software on top of net2phone firmware.

    ReplyDelete
  3. emcinnesMarch 31, 2019 at 4:42 PM

    I keep hearing about "telnet" into the mta, however I have had no sucess in doing so. Is it possible to telnet into this thing? or should i just smash it into the sidewalk? It was free to me, now I know why.

    ReplyDelete

Subscribe to: Post Comments (Atom)